AP8481 Rack PDU 2G, Metered-by-Outlet, ZeroU, 11.0kW, 230V, (21) C13 & (3) C1, AP8481

Rack PDU 2G, Metered-by-Outlet, ZeroU, 16A, 230V, (21) C13 & (3) C19

The Schneider Electric Rack Power Distribution Unit (PDU) distributes power to devices in a rack. The Rack PDU measures the load of the PDU, phase and each individual outlet. You can access the Rack PDU through Web, Telnet, SNMP, SSH, or StruxureWare interfaces for comprehensive configuration and monitoring functionality. The Network Port Sharing (NPS) feature allows up to four AP8XXX Rack PDUs to be connected together within a rack in order to share one IP address

Outlets – The Rack PDU has twenty-one (21) IEC-320-C13 and three (3) IEC-320-C19 locking outlets . (The locking feature is compatible with Schneider Electric locking input cords and Schneider Electric locking jumper cords.)

Display interface – The liquid crystal display (LCD) and input buttons allow you to monitor current, power, and voltage measurements of the Rack PDU. Local communication can be established through the serial port, and remote communication through the network port. The USB port allows for firmware upgrades, and the In/Out ports enable connection of up to four Rack PDUs via the NPS feature. The environmental sensor port allows for monitoring of the temperature and humidity of the room or enclosure.

Power cord – The Rack PDU has one IEC-320 inlet. (Power cord provided on AP8459EU3 and AP8459NA3 only.)

Toolless mounting – The Rack PDU has two rear-mounted toolless mounting pegs for 0 U mounting capability in a rack or enclosure.