Power Saving Back-UPS RS 1500 230V, BR1500GI

Back-UPS Pro Features & Benefits

Manageability

Disconnected battery notificationWarns when a battery is not available to provide backup power.LCD Status DisplayProvides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.USB connectionUse your PC to access additional power protection and management features for your UPS via a USB Port.Audible alarmsProvides notification of changing utility power and UPS power conditions

Marketing Features

Energy Management FunctionEnergy saving feature automatically power off peripherals when the a master device, usually a PC, hibernates or is shut down. Power to peripherals is immediately restored when the master device wakes up or is switched on.LCD Status DisplayProvides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.Green modePatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.Battery-protected and surge-only outletsReserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipmentBoost Automatic Voltage Regulation (AVR)Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

Safety

Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Availability

Green modePatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.Boost and Trim Automatic Voltage Regulation (AVR)Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).Energy Management FunctionEnergy saving feature automatically power off peripherals when the a master device, usually a PC, hibernates or is shut down. Power to peripherals is immediately restored when the master device wakes up or is switched on.Customizable voltage-transfer pointsAdjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.Customizable voltage sensitivityToggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.Cold-start capableProvides temporary battery power when the utility power is out.Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenanceAutomatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.Transformer-block spaced outletsProtect equipment with input transformer blocks without blocking access to other receptacles.

Serviceability

Simple battery replacementIncreases UPS availability by allowing quick, easy battery replacement.Resettable circuit breakerEasy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)

Protection

Battery and surge protected outletsBack up and protect your hardware and data during power outages, surges and spikes.Dataline surge protectionProvides protection of connected equipment from power surges on the data lines.Surge only outletsProtect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.